|
11)
Message boards :
Number crunching :
ACEM Beta 6.47 bug
(Message 26827)
Posted 4259 days ago by zioriga @Snow Crash Ok thanks I turned off "Run test application" but this is a little disappointing!! If I turn off "run ACEM Beta" this means not to run ACEM Beta !!! I think the webmaster shoud do some work to eliminate this misunderstanding |
|
12)
Message boards :
Number crunching :
ACEM Beta 6.47 bug
(Message 26820)
Posted 4259 days ago by zioriga After some try and error I've found a bug. If you, for example, set to run GPU "Only after computer has been idle for xx minutes" every ACEM Beta WU may crash with computation error. This happens if, and only if, the computer starts a new WU and within an interval of time (I haven't yet found which one - but I think a short interval - some minutes) the WU is stopped because the user is working again. Next time the computer restarts working on the previous WU, this WU crashes with Computation Error. In other words there is a starting interval af time where the WU must run uninterrupted. My configuration: Win XP 64b - NVidia GTX 680 - BOINC 7.0.33 BTW, if a previous post (http://www.gpugrid.net/forum_thread.php?id=3125) I wrote about receiving ACEM Beta WU even if I set not to run them, but I continue to receive only ACEM beta[/url] |
|
13)
Message boards :
Number crunching :
ACEM Beta
(Message 26813)
Posted 4260 days ago by zioriga For Markj Sorry. When I wrote: I've set not to receive ACEM beta WU I meant not to run ACEM beta (for me this is the same thing). |
|
14)
Message boards :
Number crunching :
ACEM Beta
(Message 26795)
Posted 4261 days ago by zioriga I've set not to receive ACEM beta WU because quite all abort with computation error. I made an update on BOINC Manager, but despite this, I continue to receive only ACEM beta !!!!! |
|
15)
Message boards :
Number crunching :
Problems with xxx-PAOLA_xxx WU - Never ending run ?
(Message 26302)
Posted 4316 days ago by zioriga Sorry, may be a problem on my computer. There was another program with an infinite loop !!!! |
|
16)
Message boards :
Number crunching :
Problems with xxx-PAOLA_xxx WU - Never ending run ?
(Message 26301)
Posted 4317 days ago by zioriga After 20 min of continuous run the progress is stuck at 0.00% I prefer to abort it. Windows XP 64b NVidia GTX680 BOINC 7.0.31 |
|
17)
Message boards :
Graphics cards (GPUs) :
Problems with D328-OTTO_HER............ WU
(Message 15522)
Posted 5181 days ago by zioriga Sorry little error: (other times reaches 99.76 or 99.68 but bounces back to 99.712 - now the elapse is about 29 hours) the correct interval is 99.216 --------- 99.76 or 99.68 |
|
18)
Message boards :
Graphics cards (GPUs) :
Problems with D328-OTTO_HER............ WU
(Message 15519)
Posted 5181 days ago by zioriga I think there is a problem with this WU 3/1/2010 6:29:59 AM GPUGRID Restarting task D328-OTTO_HERGflip656-10-100-RND8625_0 using acemd version 671 The progress reaches about 99.712 % and then bounce back to 99.216 %. Again to 99.712 and again to 99.216, and continuously such a way !!! It seems an infinite loop. (other times reaches 99.76 or 99.68 but bounces back to 99.712 - now the elapse is about 29 hours) I decide to abort it!! GPUGrid is running continuously with no suspension! Win XP 64b BM 6.10.35 (64b version) NVidia GT9800 |
|
19)
Message boards :
Number crunching :
No progress with Acem beta 6.06
(Message 14863)
Posted 5209 days ago by zioriga I have a box with NVidia Gt98000 which is running with Acem beta 6.06 and the problem is that the progress seems stuck at 0.000 after 3 hours and a half of elapsed and 4m 44s of CPU time Cuda driver 191.07 Win Xp 64b, BM 6.10.29 task L38-TONI_TEST2901-1-10-RND1295_2 |
|
20)
Message boards :
Graphics cards (GPUs) :
How to receive only one WU at a time ?
(Message 13771)
Posted 5268 days ago by zioriga SKGiven wrote Is your network usage set to, Connect about every 0.00 days? Yes it is. And your Additional work buffer set to 0.2 days (or less)? I setted to 0.0 days and quite few hous ago I received only one WU. At Last !!!!! |
Previous 10 | Next 10
