Message boards : Graphics cards (GPUs) : GIANNI_KKFREE5 Units error while computing
Author | Message |
---|---|
Recently, I had error while computing, on 4 GIANNI_KKFREE5 Units. They all ran on my windows 7 computer with a GTX 480 cards. All the errors occurred, while the unit was running on card 0, which is the bottom card, which runs a few degrees cooler than the other card. My monitor is connected to card 1. No other errors occurred on any other work unit type or the other card. | |
ID: 22276 | Rating: 0 | rate: / Reply Quote | |
They are a little harder on your GPU. They run hotter need more volts than other WUs types if you are overclocking. | |
ID: 22277 | Rating: 0 | rate: / Reply Quote | |
For our 4 non overclocked cards: all is ok. | |
ID: 22278 | Rating: 0 | rate: / Reply Quote | |
GIANNI_KKFREE5 tasks run fine here. | |
ID: 22279 | Rating: 0 | rate: / Reply Quote | |
I agree with Steve. I can see your clock is 1.51GHz (a slight overclock), so I suggest you reduce your frequencies a bit. You might get away with just reducing the GDDR speed, but if not tone down the GPU too. | |
ID: 22280 | Rating: 0 | rate: / Reply Quote | |
I reduced the graphic speed little bit, and hope this does the trick. Temperature is not the issue here. The errors occurred on the cooler card (card 0) running GIANNI units. There were no errors on the TONI nor IBUCH units. | |
ID: 22282 | Rating: 0 | rate: / Reply Quote | |
Message boards : Graphics cards (GPUs) : GIANNI_KKFREE5 Units error while computing